24" x 12" Fixture Plate - 5/8" System FA75_Segment This is the ideal starter

This is the ideal starter package for a welding table with 5/8 or 16 mm holes

Choose from several sizes depending on the thickness and design of the parts you are trying to attach

ensures a continuous stream of air between pad and disc for cool operation and long disc life

The two vises are identical in design except for some “USA” lettering on the side of the US vise

If you want a flat welding table you need these fasteners

24" x 12" Fixture Plate - 5/8" System FA75_Segment This is the ideal starterThis plate can be used as a standalone work surface when retrofitted to a grinder or drill press, or used in multiples to create a welding table. Each plate is over 3 4 thick with reinforced ribbing. Made from gray cast iron. The holes are spaced 2 apart, diameter of 5 8 to fit BuildPro tooling. The mounting holes are fitted with non locating bushings to create the mounting surface: Suggested for situations where the plate does not need to be removed